Identical to the MicW M215 microphone, only with an additional 10dB of applied attenuation.
The MicW M215L is identical to the MicW M215 microphone, only with an additional 10dB of applied attenuation.
*The MicW M215L is identical to the MicW M215 microphone, only with an additional 10dB of applied attenuation.
The MicW M215 is a calibrated measurement microphone with a 1/2 inch capsule. It complies with the IEC 61094 and IEC 61672 Class 1 sound level meter standards widely used in professional audio environments, such as theatres, recording studios, control room design and stage acoustics, for measuring the technical references.
It is easy to make flat response microphones at certain environmental conditions, but what is not easy, is to produce microphones that remain stable when used in changing environments. When the temperature increases, the diaphragm will expand, resulting in an altered sensitivity and reduced high frequency response.
Type: Pre-polarized Condenser
Capsule diameter: 12.7mm
Polar Pattern: omnidrectional
Sensitivity(±2 dB): 40mV/Pa
Frequency Response: 20Hz ~ 31.5kHz
Max. SPL(<1% THD): 135 dB
Equ. noise level: <18 dBA
Power Source: 48V Phantom power
Output impedance: <75 Ohm
Temperature Coefficient(dB/ºC) 0.009
Humidity Coefficient (dB/%RH) 0.001
Pressure Coefficient(dB/kPa) 0.008
Connector: 3-pin XLR